Home / Rivo / Rivo Phantom PZ1

Rivo Phantom PZ1

  • Hard Reset 
  • Soft Reset 
  • Recovery Mode 
  • Unlock Pattern 
  • How to Flash 
  • Flash File 

Hard Reset Rivo Phantom PZ1

Rivo Phantom PZ1

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                    ( If Keys Combination not work Use this lenovo Templete )
  4. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
    After Splash Screen a set of options will appear.
  5. In order to choose “wipe data/factory reset” Plz Follow instruction on your mobile Screen to navigate and to confirm

HardReset-Wipe-data-factory-reset

Next, select “Yes–delete all user data“. Plz Follow again instruction on your mobile Screen to scroll and to select.

HardReset Yess delete all

To restart the phone, select “reboot system now“.

HardReset Reboot
Success! Your phone should begin the hard reset operation.

Soft Reset Rivo Phantom PZ1

1. First of all, make sure that your device is on.
2. Then from the home screen open Menu and choose Settings.
3. After that select Backup&Reset and tap Factory data reset.
4. Choose Reset phone and select Erase everything to begin hard reset operation.
5. Well done! Your cell phone is ready to use.

Factory-Reset1

Recovery Mode Rivo Phantom PZ1

Rivo Phantom PZ1

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                    ( If Keys Combination not work Use this lenovo Templete )
  4. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
  1. HardReset Reboot

Remove or Unlock Rivo Phantom PZ1 Pattern

Rivo Phantom PZ1

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                    ( If Keys Combination not work Use this lenovo Templete )
  4. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
    After Splash Screen a set of options will appear.
  5. In order to choose “wipe data/factory reset” Plz Follow instruction on your mobile Screen to navigate and to confirm
  1. HardReset-Wipe-data-factory-reset

Next, select “Yes–delete all user data“. Plz Follow again instruction on your mobile Screen to scroll and to select.

HardReset Yess delete all

To restart the phone, select “reboot system now“.

HardReset Reboot
Success! Your phone should begin the hard reset operation.

How to Flash Rivo Phantom PZ1

  1. Before Flashing Your Mobile You Need:
    • USB data cable
    • MediaTek USB VCOM drivers
    • SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
    • Flash File
    1. First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
    2. First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
    3. Browse the location of Rivo Phantom PZ1 file and choose the “Scatter File” which is named as”MT65xx  Android_scatter”.
    4. Please wait while Rivo Phantom PZ1 file is loaded in Flash tool or any other Box.
    5. Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
    6. Switch-off the phone, Remove it’s battery and replace it back.
    7. Hit the “Download” or “Firmware Upgrade” button.
    8. Plug-in the USB cable to phone to connect it to your PC.
    9. The process will be started, and Red, Purple & Yellow progress stripes will be shown.
    10. “Ok” Notification will be appeared on a green circle at the end of whole process.
    11. Plug it out from USB cable. And you can turn it on.
    12. If you what to learn more about Flashing or SP Tool Using this Link.

How to Flash Mobile Firmware

Rivo Phantom PZ1 Flash File Download

Before Flashing Your Mobile You Need:

  • USB data cable
  • MediaTek USB VCOM drivers
  • SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
  • Flash File
  1. First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
  2. First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
  3. Browse the location of Rivo Phantom PZ1 file and choose the “Scatter File” which is named as”MT65xx  Android_scatter”.
  4. Please wait while Rivo Phantom PZ1 file is loaded in Flash tool or any other Box.
  5. Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
  6. Switch-off the phone, Remove it’s battery and replace it back.
  7. Hit the “Download” or “Firmware Upgrade” button.
  8. Plug-in the USB cable to phone to connect it to your PC.
  9. The process will be started, and Red, Purple & Yellow progress stripes will be shown.
  10. “Ok” Notification will be appeared on a green circle at the end of whole process.
  11. Plug it out from USB cable. And you can turn it on.
  12. If you what to learn more about Flashing or SP Tool Using this Link.

Download SP Tool:

Download1

Download Flash File:

Download1

About javedskt2006

Check Also

Rivo Phantom PZ4

Leave a Reply

Your email address will not be published. Required fields are marked *