Home / Rivo / Rivo Phantom PZ18

Rivo Phantom PZ18

  • Hard Reset 
  • Soft Reset 
  • Recovery Mode 
  • Unlock Pattern 
  • How to Flash 
  • Flash File 

Hard Reset Rivo Phantom PZ18

Rivo Phantom PZ18

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                           Or
  4. Volume Down + Power Button                     Or
  5. Volume Down + Volume UP + Power Button For Few Seconds
  6. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
    After Splash Screen a set of options will appear.
  7. In order to choose “wipe data/factory reset” Plz Follow instruction on your mobile Screen to navigate and to confirm

HardReset-Wipe-data-factory-reset

Next, select “Yes–delete all user data“. Plz Follow again instruction on your mobile Screen to scroll and to select.

HardReset Yess delete all

To restart the phone, select “reboot system now“.

HardReset Reboot
Success! Your phone should begin the hard reset operation.

Soft Reset Rivo Phantom PZ18

1. First of all, make sure that your device is on.
2. Then from the home screen open Menu and choose Settings.
3. After that select Backup&Reset and tap Factory data reset.
4. Choose Reset phone and select Erase everything to begin hard reset operation.
5. Well done! Your cell phone is ready to use.

Factory-Reset1

Recovery Mode Rivo Phantom PZ18

Rivo Phantom PZ18

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                           Or
  4. Volume Down + Power Button                     Or
  5. Volume Down + Volume UP + Power Button For Few Seconds
  6. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
  1. HardReset Reboot

Remove or Unlock Rivo Phantom PZ18 Pattern

Rivo Phantom PZ18

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                           Or
  4. Volume Down + Power Button                     Or
  5. Volume Down + Volume UP + Power Button For Few Seconds
  6. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
    After Splash Screen a set of options will appear.
  7. In order to choose “wipe data/factory reset” Plz Follow instruction on your mobile Screen to navigate and to confirm
  1. HardReset-Wipe-data-factory-reset

Next, select “Yes–delete all user data“. Plz Follow again instruction on your mobile Screen to scroll and to select.

HardReset Yess delete all

To restart the phone, select “reboot system now“.

HardReset Reboot
Success! Your phone should begin the hard reset operation.

How to Flash Rivo Phantom PZ18

  1. Before Flashing Your Mobile You Need:
    • USB data cable
    • MediaTek USB VCOM drivers
    • SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
    • Flash File
    1. First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
    2. First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
    3. Browse the location of Rivo Phantom PZ18 file and choose the “Scatter File” which is named as”MT65xx  Android_scatter”.
    4. Please wait while Rivo Phantom PZ18 file is loaded in Flash tool or any other Box.
    5. Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
    6. Switch-off the phone, Remove it’s battery and replace it back.
    7. Hit the “Download” or “Firmware Upgrade” button.
    8. Plug-in the USB cable to phone to connect it to your PC.
    9. The process will be started, and Red, Purple & Yellow progress stripes will be shown.
    10. “Ok” Notification will be appeared on a green circle at the end of whole process.
    11. Plug it out from USB cable. And you can turn it on.
    12. If you what to learn more about Flashing or SP Tool Using this Link.

How to Flash Mobile Firmware

Rivo Phantom PZ18 Flash File Download

Before Flashing Your Mobile You Need:

  • USB data cable
  • MediaTek USB VCOM drivers
  • SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
  • Flash File
  1. First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
  2. First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
  3. Browse the location of Rivo Phantom PZ18 file and choose the “Scatter File” which is named as”MT65xx  Android_scatter”.
  4. Please wait while Rivo Phantom PZ18 file is loaded in Flash tool or any other Box.
  5. Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
  6. Switch-off the phone, Remove it’s battery and replace it back.
  7. Hit the “Download” or “Firmware Upgrade” button.
  8. Plug-in the USB cable to phone to connect it to your PC.
  9. The process will be started, and Red, Purple & Yellow progress stripes will be shown.
  10. “Ok” Notification will be appeared on a green circle at the end of whole process.
  11. Plug it out from USB cable. And you can turn it on.
  12. If you what to learn more about Flashing or SP Tool Using this Link.

Download SP Tool:

Download1

Download Flash File:

Download1

Download1

  • Pz18 Rivo MT6582 firmware | flash file
  • MT6582__RIVO__PHANTOM_PZ18__RIVO_PZ18__5.0__S3567_DS35671_RIVO-PZ18-WHITE_L103
  • Rivo Phantom PZ18 firmware
  • Android Version 5.0
  • Download free file

About javedskt2006

2 comments

  1. Dear Sir, I have Rivo PZ 18, Unfortunately my data (Camera Pics Data) deleted from me mistakenly. Is there any way to recover this data back into my cell phone. Your kind & urgent response will highly appreciate in this regard.

  2. yes there is way but dont know that rivo device will recover or not also it will need software that will be paid application you can check it on internet that how to recover rivo pz 8 mobile data…

Leave a Reply

Your email address will not be published. Required fields are marked *

}