Home / Rivo / Rivo Rhythm RX100

Rivo Rhythm RX100

  • Hard Reset 
  • Soft Reset 
  • Recovery Mode 
  • Unlock Pattern 
  • How to Flash 
  • Flash File 

Hard Reset Rivo Rhythm RX100

Rivo Rhythm RX100

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                           Or
  4. Volume Down + Power Button                     Or
  5. Volume Down + Volume UP + Power Button For Few Seconds
  6. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
    After Splash Screen a set of options will appear.
  7. In order to choose “wipe data/factory reset” Plz Follow instruction on your mobile Screen to navigate and to confirm

HardReset-Wipe-data-factory-reset

Next, select “Yes–delete all user data“. Plz Follow again instruction on your mobile Screen to scroll and to select.

HardReset Yess delete all

To restart the phone, select “reboot system now“.

HardReset Reboot
Success! Your phone should begin the hard reset operation.

Soft Reset Rivo Rhythm RX100

1. First of all, make sure that your device is on.
2. Then from the home screen open Menu and choose Settings.
3. After that select Backup&Reset and tap Factory data reset.
4. Choose Reset phone and select Erase everything to begin hard reset operation.
5. Well done! Your cell phone is ready to use.

Factory-Reset1

Recovery Mode Rivo Rhythm RX100

Rivo Rhythm RX100

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                           Or
  4. Volume Down + Power Button                     Or
  5. Volume Down + Volume UP + Power Button For Few Seconds
  6. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
  1. HardReset Reboot

Remove or Unlock Rivo Rhythm RX100 Pattern

Rivo Rhythm RX100

  1. Switch off your Android Phone.
  2. Press and hold together
  3. Volume UP + Power Button                           Or
  4. Volume Down + Power Button                     Or
  5. Volume Down + Volume UP + Power Button For Few Seconds
  6. Release the buttons when you see an Android icon on your mobile screen Press the Home Button to see Recovery Menu.
    After Splash Screen a set of options will appear.
  7. In order to choose “wipe data/factory reset” Plz Follow instruction on your mobile Screen to navigate and to confirm
  1. HardReset-Wipe-data-factory-reset

Next, select “Yes–delete all user data“. Plz Follow again instruction on your mobile Screen to scroll and to select.

HardReset Yess delete all

To restart the phone, select “reboot system now“.

HardReset Reboot
Success! Your phone should begin the hard reset operation.

How to Flash Rivo Rhythm RX100

  1. Before Flashing Your Mobile You Need:
    • USB data cable
    • MediaTek USB VCOM drivers
    • SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
    • Flash File
    1. First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
    2. First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
    3. Browse the location of Rivo Rhythm RX100 file and choose the “Scatter File” which is named as”MT65xx  Android_scatter”.
    4. Please wait while Rivo Rhythm RX100 file is loaded in Flash tool or any other Box.
    5. Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
    6. Switch-off the phone, Remove it’s battery and replace it back.
    7. Hit the “Download” or “Firmware Upgrade” button.
    8. Plug-in the USB cable to phone to connect it to your PC.
    9. The process will be started, and Red, Purple & Yellow progress stripes will be shown.
    10. “Ok” Notification will be appeared on a green circle at the end of whole process.
    11. Plug it out from USB cable. And you can turn it on.
    12. If you what to learn more about Flashing or SP Tool Using this Link.

How to Flash Mobile Firmware

Rivo Rhythm RX100 Flash File Download

Before Flashing Your Mobile You Need:

  • USB data cable
  • MediaTek USB VCOM drivers
  • SP Flash Tool ( Latest version MTK Flash Tool v. 5.1343.01 (18.10.2013))
  • Flash File
  1. First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
  2. First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
  3. Browse the location of Rivo Rhythm RX100 file and choose the “Scatter File” which is named as”MT65xx  Android_scatter”.
  4. Please wait while Rivo Rhythm RX100 file is loaded in Flash tool or any other Box.
  5. Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
  6. Switch-off the phone, Remove it’s battery and replace it back.
  7. Hit the “Download” or “Firmware Upgrade” button.
  8. Plug-in the USB cable to phone to connect it to your PC.
  9. The process will be started, and Red, Purple & Yellow progress stripes will be shown.
  10. “Ok” Notification will be appeared on a green circle at the end of whole process.
  11. Plug it out from USB cable. And you can turn it on.
  12. If you what to learn more about Flashing or SP Tool Using this Link.

Download SP Tool:

Download1

Download Flash File:

Download1

Download1

Password:   Gsm.Marhaba

 

  • Rx100 Rivo lollipop 5.0 firmware | flash file
  • MT6582__Rivo__RHYTHM_RX100__RHYTHM__5.0__RIVO_RHYTHM_RX100_S008_20150617
  • Rivo Rx100 Rhytum firmware
  • Android Version 5.0
  • Download free file

About javedskt2006

Check Also

Rivo Phantom PZ4

Leave a Reply

Your email address will not be published. Required fields are marked *